Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

switch access lists

Is there anyway to implement an access list on a cisco switch (both CatOS and IOS), not using a MSFC card? I know CatOS can do a limited access list for like telnet,ssh,snmp (and one other i think) but IOS I cant tell if can or not just by looking at the documentation. I mean since the switch is layer 2 it shouldnt even be controlling ip traffic.

However, if there is anyway I can set up an access list I would be glad to hear suggestions. Thanks.

1 REPLY
Cisco Employee

Re: switch access lists

Hi Friend,

Yes layer 2 switches like 2950 does support ACLs but yes there are some limitations. You can have a look at this link

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_22_ea2/configuration/guide/swacl.html

All layer 3 switches like 3550 and above does supports ACLs.

HTH

Ankur

*Pls rate all helpfull post

115
Views
0
Helpful
1
Replies
CreatePlease login to create content