Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

switch: format flash: Are you sure you want to format "flash:" (all data wi

Dear,

Pl explain the cause of the error.

switch: format flash:

Are you sure you want to format "flash:" (all data will be lost) (y/n)?y

Filesystem "flash:" not formatted -- device busy

Thanks

3 REPLIES

Re: switch: format flash: Are you sure you want to format "flash

hi

Use commands "erase flash:" to format the flash.

It will erase the complete flash, your device will not boot.

Which is the device you are trying to format. ??

HTH...rate if helpful..

New Member

Re: switch: format flash: Are you sure you want to format "flash

Satish,

I am in boor loader console (switch:)

Here even after formatted the flash I could not

copy the image from xmodem.The error as below

switch: copy xmodem: flash:

Begin the Xmodem or Xmodem-1K transfer now...

CCCCCCCCCCBB0BB0xmodem:: I/O error

What could be the issues to solve.

New Member

Re: switch: format flash: Are you sure you want to format "flash

Satish,

When i did the xmodem i am getting the below error.

switch: copy xmodem: flash:c3560-advipservicesk9-mz.122-44.SE.bin

Begin the Xmodem or Xmodem-1K transfer now...

CC B B0 .......................................................................

.....999999999999999999999999999999999999999999999999999999999999999999999999999

99999999999999999999999999999999999999999999999999999999999999999999999999999999

99999999999999999999999999999999999999999999999999999999999999999999999999999999

99999999999999999999999999999999999999999999999999999999999999999999999999999999

99999999999999999999999999999999999999999999999999999999999999999999999999999999

9999テflashfs[0]: block_num (-253) not in range between 0 and 252.

flashfs[0]: flashfs_touch, unable to lookup filemap for fileid 1

flashfs[0]: filesystem marked down. Use "fsck" to recover.

flash:c3560-advipservicesk9-mz.122-44.SE.bin: I/O error

326
Views
0
Helpful
3
Replies