Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Switch IOS issue ?

Hi,

I have lately started to recieve large amount of alerts in my Ciscoworks from my few 3550 switches uplinked to a 3750 Core switch. Few of the events are below -

1) EVENT DESCRIPTION = HighUtilization::Component=PORT-10.5.11.207/1.49 [Gi0/1];OutputPacketRate=48.266666 PPS;Type=ETHERNETCSMACD;CurrentUtilization=1.22978294E10 %;InputPacketRate=67.25084 PPS;TrafficRate=1.53722871E16 BYPS;UtilizationThreshold=40;DuplexMode=FULLDUPLEX;MaxSpeed=1000000000;

2) EVENT DESCRIPTION = PORT-10.5.11.207/1.49 [Gi0/1]:HighBroadcastRate; PORT-10.5.11.207/1.49 [Gi0/1]:HighUtilization;

3) EVENT DESCRIPTION = HighBroadcastRate::Component=PORT-10.5.11.207/1.49 [Gi0/1];AvgInputPacketSize=2.28577941E14;InputPacketBroadcastPct=2.33012352E9 %;Type=ETHERNETCSMACD;InputPacketRate=67.25084 PPS;InputPacketBroadcastRate=12.7425 PPS;DuplexMode=FULLDUPLEX;MaxSpeed=1000000000;BroadcastThreshold=15;

All these switches are running similar IOS - (C3550-I9Q3L2-M), Version 12.1(9) EA1c.

I doubt this could be issue with IOS,has anyone seen this before.

thanks in advance

sachin verma

1 REPLY
Purple

Re: Switch IOS issue ?

Have not seen any known issues with the 3550's , that being said that version you are running is about as old as it gets for that line , it is up to 12.2.44SG now . You would have to look on the switch while its happening to see if those interfaces are truly busy and not rely on the snmp traps .

158
Views
0
Helpful
1
Replies