interface Vlan50 description users ip address 10.50.1.1 255.255.0.0 ip helper-address 10.50.128.10 -------> DHCP server ! interface Vlan116 description SALES ip address 10.116.1.1 255.255.255.0 ip helper-address 10.50.128.10 -------> DHCP server ! !interface Vlan117 description WLAN User ip address 10.117.1.1 255.255.255.0 ip helper-address 10.50.128.10 -------> DHCP server
description WLAN GUEST ip address 10.116.3.1 255.255.255.0 ip helper-address 10.50.128.10 -------> DHCP server
Re: Switch Port config for DHCP server with 4 scopes
You do not need a IP helper-address on VLAN50 , machines on that VLAN will broadcast on the subnet for a DHCP server (meaning no helper needed)...
*** IMPORTANT *** Your machines on VLAN50 will need to use the default gateway of 10.50.1.1 for inter-vlan routing (and the ability for the IP helper to communicate with the DHCP server)
Other than that, your configurations are correct and it will work. If you've never used IP helpers and/or DHCP server on the switch before, please do a #service DHCP command to enable the DHCP service on the switch.
Other than that - all should work assuming there are not ACLs specifically blocking inter-vlan or DHCP traffic.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...