Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

switch port on multiple vlans

On the old 3500xl we could use the multi-VLAN command to set up a port to allow more than one VLAN on a port that is not trunked. Can this be done on a 2960?

3 REPLIES

Re: switch port on multiple vlans

No, they abandoned that feature.

Kevin Dorrell

Luxembourg

Community Member

Re: switch port on multiple vlans

Anybody got a work around or a trick to allow a port to be assgined to more than one VLAN for access mode?

Community Member

Re: switch port on multiple vlans

I was able to do it, but with a data and a voice vlan (but I'm not sure if your IOS will support it. Here is my config on the port.

interface FastEthernet0/6

switchport trunk encapsulation dot1q

switchport trunk native vlan 7

switchport mode trunk

switchport voice vlan 100

switchport priority extend cos 3

spanning-tree portfast

130
Views
0
Helpful
3
Replies
CreatePlease to create content