Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Switch Stack

Hi All

Can I stack a WS-C3750G-48TS-S and a WS-C3750G-12S-S? And what do I use?

If I can, do i need to respecify the switches asking for stacks or do they come already stack specified?

Thanks

2 REPLIES
New Member

Re: Switch Stack

Hi,

If both switch models support stacking (i.e they have stackwise ports) then you can stack them, even if they have differing port capacities.

You will need to use stackwise cables (0.5m usually supplied in box).

Be careful to note the usual stacking rules regarding IOS levels etc.

Hope that helps.

Doug

Cisco Employee

Re: Switch Stack

Hi Friend,

Please go through the link below and you will get to know all the software/hardware compatibility options:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_see/configuration/guide/swstack.html#wp1189553

HTH, Please rate if it does.

-amit singh

121
Views
0
Helpful
2
Replies