Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

switch stack.

Hi Experts,

I have to stack 4 switches in my organization that all switches have different vlans

Firends can anybody explain what are the steps, commands I have to do.

Regards,

Naidu.

1 REPLY
New Member

Re: switch stack.

What model switches are you stacking? If 3750s with stack cables, they will look like one switch. YOu don't have to do anything special. If it's a 3550/3560 do this:

- Set all switches to VTP mode transparent

vtp mode transparent

- Set all switches vtp domain name so that it is not NULL

vtp domain MYVTP

- Create vlans on all switches

vlan 100

vlan 101

vlan 102

The ports that connect to one another should look like this:

interface GigabitEthernet0/1

switchport trunk encapsulation dot1q

switchport mode trunk

spanning-tree portfast disable

The user ports of the switch should look like this:

interface GigabitEthernet0/7

switchport host

! this is a script that does a few commands

switchport access vlan 100

spanning-tree portfast

This is just a bare minimum configs, but it should get the 4 talking to one another. If your switch is a completely different model, post that here. That will help.

119
Views
0
Helpful
1
Replies
CreatePlease login to create content