Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Switch trunk native and switchport trunk allowed commands

  Hello,

What will be the result of having these two commands defined on trunk

Switch(Config-if)# switchport trunk native vlan 500

Switch(Config-if)# switchport trunk allowed vlan remove 500

Thanks        

3 REPLIES
Purple

Switch trunk native and switchport trunk allowed commands

Traffic from vlan 500 will be sent untagged .

Switch trunk native and switchport trunk allowed commands

The first command would send traffic untagged over vlan 500, but the second command removes vlan 500 from the trunk, so I think you would lose traffic for anything using vlan 500....

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
Hall of Fame Super Blue

Re: Switch trunk native and switchport trunk allowed commands

Zafar

I agree with John, basically vlan 500 will not be allowed across the trunk link.

I assume the reasoning behind the configuration is that all vlans sent across the link should be tagged.

Jon

117
Views
0
Helpful
3
Replies
CreatePlease login to create content