12-14-2011 01:59 AM - edited 03-07-2019 03:53 AM
Hi,
We have cisco 4506 and this got reloaded automatically and showing reload in show version output but no one made switch reload.
CORE-SW-2 uptime is 8 minutes
System returned to ROM by reload
System restarted at 12:37:58 IST Wed Dec 14 2011
Attaching show tech-support and suggest us in this case. Confirm us if there is any specific bug impact.
Regds,
Ashutosh
bootflash: cat4500-ipbase-mz.122-25.SG.bin
Solved! Go to Solution.
12-14-2011 11:48 PM
Hi ,
Please mark this as answered if the solution was helpful to you.
also rate the information.
cheers,
aslam
12-14-2011 02:09 AM
Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C45-1000AC AC 1000W bad/off bad/off n.a.
12-14-2011 02:15 AM
Dec 14 12:20:17: %SYS-5-CONFIG_I: Configured from console by neetesh on vty1 (10.24.67.100)CMD: 'sh int g0/43' 12:20:26 IST Wed Dec 14 2011
CMD: 'sh int g0/43' 12:20:42 IST Wed Dec 14 2011
CMD: 'sh int g6/' 12:21:38 IST Wed Dec 14 2011
CMD: 'sh int g0/24' 12:21:43 IST Wed Dec 14 2011
CMD: 'sh arp' 12:22:50 IST Wed Dec 14 2011
CMD: 'sh int Gi6/27' 12:28:47 IST Wed Dec 14 2011
CMD: 'sh int g6/27' 12:29:47 IST Wed Dec 14 2011
CMD: 'sh ver' 12:30:07 IST Wed Dec 14 2011
CMD: 'sh cdp ne' 12:30:37 IST Wed Dec 14 2011
CMD: 'sh cdp ne' 12:30:46 IST Wed Dec 14 2011
CMD: 'sh cdp neighbors de' 12:30:47 IST Wed Dec 14 2011
CMD: 'sh cdp neighbors detail ' 12:30:47 IST Wed Dec 14 2011
CMD: 'ex' 12:36:24 IST Wed Dec 14 2011
After this the SupV card crashed.
ErrDr1=00 ErrDr2=00 ErrStsCpu=32 ErrStsPci=00
BusErrAddr=D00010A0
Single bit ECC count 0
Traceback: 1051B158 10B97FD0 106A508C 106A4F64 106A4C94 106A4708 107465D4 1075F564 1051CD40 105136A8
First time I've seen this kind of error message before. You may need to open a TAC Case.
12-14-2011 02:37 AM
Hi leo,
Also confirm if there is any specific Bug ID's impact on the IOS running with this switch.
running IOS:cat4500-ipbase-mz.122-25.SG.bin
Regds,
Ashutosh
12-14-2011 02:58 AM
Hi Ashutosh :
check out this.
Symptom:
A Catalyst switch running Cisco IOS release 12.2(25)SG, 12.2(25)SEA, 12.2(25)SEB, 12.2(25)EZ,
or 12.2(25)EY might reload when
show cdp neighbor detail
is entered.
This defect does not affect any other Cisco IOS release.
Condition:
The CDP neighbor was removed at the exact time that the command
show cdp neighbor
detail
was entered.
Workaround:
While running these specific releases of Cisco IOS, there is no workaround. Symptom:
A Catalyst switch running Cisco IOS release 12.2(25)SG, 12.2(25)SEA, 12.2(25)SEB, 12.2(25)EZ,
or 12.2(25)EY might reload when show cdp neighbor detail is entered.
This defect does not affect any other Cisco IOS release.
Condition:
The CDP neighbor was removed at the exact time that the command show cdp neighbor
detail was entered.
Workaround:
While running these specific releases of Cisco IOS, there is no workaround.
12-14-2011 02:59 AM
Hi Ashutosh :
check out this.
Symptom:
A Catalyst switch running Cisco IOS release 12.2(25)SG, 12.2(25)SEA, 12.2(25)SEB, 12.2(25)EZ,
or 12.2(25)EY might reload when
show cdp neighbor detail
is entered.
This defect does not affect any other Cisco IOS release.
Condition:
The CDP neighbor was removed at the exact time that the command
show cdp neighbor
detail
was entered.
Workaround:
While running these specific releases of Cisco IOS, there is no workaround. Symptom:
A Catalyst switch running Cisco IOS release 12.2(25)SG, 12.2(25)SEA, 12.2(25)SEB, 12.2(25)EZ,
or 12.2(25)EY might reload when show cdp neighbor detail is entered.
This defect does not affect any other Cisco IOS release.
Condition:
The CDP neighbor was removed at the exact time that the command show cdp neighbor
detail was entered.
Workaround:
While running these specific releases of Cisco IOS, there is no workaround.
12-14-2011 01:16 PM
It's confirmed. It's a bug.
12-14-2011 11:47 PM
Hi ,
Please mark this as answered if the solution was helpful to you.
also rate the information.
cheers,
aslam
12-14-2011 11:48 PM
Hi ,
Please mark this as answered if the solution was helpful to you.
also rate the information.
cheers,
aslam
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide