Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Switch WS-C4506 reloaded automatically

Hi,

We have cisco 4506 and this got reloaded automatically and showing reload in show version output but no one made switch reload.

CORE-SW-2 uptime is 8 minutes

System returned to ROM by reload

System restarted at 12:37:58 IST Wed Dec 14 2011

Attaching show tech-support and suggest us in this case. Confirm us if there is any specific bug impact.

Regds,

Ashutosh

bootflash: cat4500-ipbase-mz.122-25.SG.bin

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Switch WS-C4506 reloaded automatically

Hi ,

Please mark this as answered if the solution was helpful to you.

also rate the information.

cheers,

aslam

8 REPLIES
Hall of Fame Super Gold

Re: Switch WS-C4506 reloaded automatically

Power                                             Fan      Inline

Supply  Model No          Type       Status       Sensor   Status

------  ----------------  ---------  -----------  -------  -------

PS1     PWR-C45-1000AC    AC 1000W   bad/off      bad/off  n.a.

Hall of Fame Super Gold

Re: Switch WS-C4506 reloaded automatically

Dec 14 12:20:17: %SYS-5-CONFIG_I: Configured from console by neetesh on vty1 (10.24.67.100)CMD: 'sh int g0/43' 12:20:26 IST Wed Dec 14 2011

CMD: 'sh int g0/43' 12:20:42 IST Wed Dec 14 2011

CMD: 'sh int g6/' 12:21:38 IST Wed Dec 14 2011

CMD: 'sh int g0/24' 12:21:43 IST Wed Dec 14 2011

CMD: 'sh arp' 12:22:50 IST Wed Dec 14 2011

CMD: 'sh int Gi6/27' 12:28:47 IST Wed Dec 14 2011

CMD: 'sh int g6/27' 12:29:47 IST Wed Dec 14 2011

CMD: 'sh ver' 12:30:07 IST Wed Dec 14 2011

CMD: 'sh cdp ne' 12:30:37 IST Wed Dec 14 2011

CMD: 'sh cdp ne' 12:30:46 IST Wed Dec 14 2011

CMD: 'sh cdp neighbors de' 12:30:47 IST Wed Dec 14 2011

CMD: 'sh cdp neighbors detail ' 12:30:47 IST Wed Dec 14 2011

CMD: 'ex' 12:36:24 IST Wed Dec 14 2011

After this the SupV card crashed.

ErrDr1=00 ErrDr2=00 ErrStsCpu=32 ErrStsPci=00

BusErrAddr=D00010A0

Single bit ECC count 0

Traceback: 1051B158 10B97FD0 106A508C 106A4F64 106A4C94 106A4708 107465D4 1075F564 1051CD40 105136A8

First time I've seen this kind of error message before.  You may need to open a TAC Case.

New Member

Switch WS-C4506 reloaded automatically

Hi leo,

Also confirm if there is any specific Bug ID's impact on the IOS running with this switch.

running IOS:cat4500-ipbase-mz.122-25.SG.bin

Regds,

Ashutosh

New Member

Switch WS-C4506 reloaded automatically

Hi Ashutosh :

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsa78000

check out this.

Symptom:

A Catalyst switch running Cisco IOS release 12.2(25)SG, 12.2(25)SEA, 12.2(25)SEB, 12.2(25)EZ,

or 12.2(25)EY might reload when

show cdp neighbor detail

is entered.

This defect does not affect any other Cisco IOS release.

Condition:

The CDP neighbor was removed at the exact time that the command

show cdp neighbor
detail

was entered.

Workaround:

While running these specific releases of Cisco IOS, there is no workaround. Symptom:
A Catalyst switch running Cisco IOS release 12.2(25)SG, 12.2(25)SEA, 12.2(25)SEB, 12.2(25)EZ,
or 12.2(25)EY might reload when show cdp neighbor detail is entered.

This defect does not affect any other Cisco IOS release.

Condition:
The CDP neighbor was removed at the exact time that the command show cdp neighbor
detail
was entered.

Workaround:
While running these specific releases of Cisco IOS, there is no workaround.

New Member

Re: Switch WS-C4506 reloaded automatically

Hi Ashutosh :

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsa78000

check out this.

Symptom:

A Catalyst switch running Cisco IOS release 12.2(25)SG, 12.2(25)SEA, 12.2(25)SEB, 12.2(25)EZ,

or 12.2(25)EY might reload when

show cdp neighbor detail

is entered.

This defect does not affect any other Cisco IOS release.

Condition:

The CDP neighbor was removed at the exact time that the command

show cdp neighbor
detail

was entered.

Workaround:

While running these specific releases of Cisco IOS, there is no workaround. Symptom:
A Catalyst switch running Cisco IOS release 12.2(25)SG, 12.2(25)SEA, 12.2(25)SEB, 12.2(25)EZ,
or 12.2(25)EY might reload when show cdp neighbor detail is entered.

This defect does not affect any other Cisco IOS release.

Condition:
The CDP neighbor was removed at the exact time that the command show cdp neighbor
detail
was entered.

Workaround:
While running these specific releases of Cisco IOS, there is no workaround.

Hall of Fame Super Gold

Re: Switch WS-C4506 reloaded automatically

It's confirmed.  It's a bug.

New Member

Re: Switch WS-C4506 reloaded automatically

Hi ,

Please mark this as answered if the solution was helpful to you.

also rate the information.

cheers,

aslam

New Member

Re: Switch WS-C4506 reloaded automatically

Hi ,

Please mark this as answered if the solution was helpful to you.

also rate the information.

cheers,

aslam

1392
Views
0
Helpful
8
Replies
CreatePlease to create content