What is the switching throughput for the WS-C3550-48-EMI? According to Cisco datasheet, it's 6.8 Gbps maximum forwarding bandwidth. Reason I am asking is because I currently have a CISCO2911/K9 as a router on a stick and it has a switching throughput of 180.73 Mbps. The 2911 is connected to a WS-C2970G-24TS-E where a few servers are connected. I want to replace the WS-C2970G-24TS-E with two existing WS-C3550-48-EMI and do intervlan routing with CEF enabled. Put the 2970 down at the access layer. What do you guys think, is this a better design?
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
What is the switching throughput for the WS-C3550-48-EMI? According to Cisco datasheet, it's 6.8 Gbps maximum forwarding bandwidth.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.