if i am transfering a file of 1G between two PCs on the same VLAN connected in same access switches where the data is traveling from access switches to core switch Unnecessarily means the 1G data is traveling b/w access and my core switch. how to avoid it.
Not sure why you think the packet will be forwarded to core switch. If both PCs are in the same subnet and connected to the same switch, the switch should have both PCs' MAC address in mac-address table and it will forward the packet based on the destination MAC directly to PC.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...