03-20-2007 02:03 PM - edited 03-05-2019 03:01 PM
Hi, I'd like to understand when the operational mode results down in the output of "show interface switchport"
i.e.: trunk not reliased or line port protocol in down
thanks
RS
Solved! Go to Solution.
03-21-2007 05:00 AM
Hi RS,
When you issue a command "sh int switchport" and you see operational mode down this is an indication that trunk operational status is down and the ports had not form a trunk.
It does not mean that line protocol is down.
HTH
Ankur
*Pls rate all helpfull post
03-21-2007 05:00 AM
Hi RS,
When you issue a command "sh int switchport" and you see operational mode down this is an indication that trunk operational status is down and the ports had not form a trunk.
It does not mean that line protocol is down.
HTH
Ankur
*Pls rate all helpfull post
01-25-2020 11:18 PM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: