%SYS-3-CPUHOG: Task is running for (151)msecs, more than (28)msecs (4/4),process = REP LSL Hello PP Process
We are having some strange behavior with an REP segment. Several times a day we get a link failure and the following message is in the ME3400 switch that drops the link. We are monitoring the CPU utilization and see no spike during the time that this happens. Also it seems to make its way around the ring with the same error happening in each switch. We have ensured all devices have the same rep admin vlan and all IOS images are the same (12.2(58)SE2). I have also verified that every switch has matching vlans. We only have 12 devices in the ring so I don't think we are near the limitations of REP. Any help would be greatly appreciated. The LSL timers are default at 5000ms.
Jul 30 10:34:05.490 EDT: %SYS-3-CPUHOG: Task is running for (26)msecs, more than (28)msecs (4/4),process = REP LSL Hello PP Process.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...