Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Syslog

So here is the command i have a question about:(hopefully this pastes correct)

R4(config)#logging trap ?

<0-7> Logging severity level

alerts Immediate action needed (severity=1)

critical Critical conditions (severity=2)

debugging Debugging messages (severity=7)

emergencies System is unusable (severity=0)

errors Error conditions (severity=3)

informational Informational messages (severity=6)

notifications Normal but significant conditions (severity=5)

warnings Warning conditions (severity=4)

<cr>

The question i have is: How do i know what is logged under say level 3 vs level 4? I cant seem to find this info anywhere. This would be for switches and routers.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Syslog

Hello Mike,

you have to look at the error message reference

here is the link to the books for IOS 12.4 mainline

http://www.cisco.com/en/US/products/ps6350/products_system_message_guides_list.html

%FACILITY-SUBFACILITY-SEVERITY-MNEMONIC: Message-text

the number is the severity level

Hope to help

Giuseppe

2 REPLIES
Hall of Fame Super Silver

Re: Syslog

Hello Mike,

you have to look at the error message reference

here is the link to the books for IOS 12.4 mainline

http://www.cisco.com/en/US/products/ps6350/products_system_message_guides_list.html

%FACILITY-SUBFACILITY-SEVERITY-MNEMONIC: Message-text

the number is the severity level

Hope to help

Giuseppe

New Member

Re: Syslog

Awesome Thank you.

95
Views
0
Helpful
2
Replies
CreatePlease login to create content