Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

TACACS ACS interface command

Hi all,

how do we give only interface level config command access and show commands for usergroup using tacacs server.

Thanks in advance.

Rgds,

Rajeshac

2 REPLIES

Re: TACACS ACS interface command

Hi Rajeshac,

You can do so via 2 methods:

1. Configure the TACACS server to assign the user a certain privilege level, and then using the privilege command on the router, configure which commands can the user with this privilege level issue.

2. Configure the TACACS server to do authorization for the router, and configure the router to accept this command authorization, and then configure on the TACACS the commands that a user can issue. (recommended)

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00804fde16.html

HTH, please rate if it does help,

Mohammed Mahmoud.

Re: TACACS ACS interface command

91
Views
0
Helpful
2
Replies