Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

TACACS and enable password

hi folks.

I am able to login to my router VIA TACACS+ server. My username and password doesnot work with enable mode. When I do enable after login to user prompt; it just throws me "Authentication failed" message.

AAA commands used

aaa new-model

aaa authentication login default group tacacs+ local

aaa authentication enable default group tacacs+ enable

I set up TACACS+ server and key as it has been working with login.

I really appreciate if any one can help in this issue.

rgrds

subharose

1 ACCEPTED SOLUTION

Accepted Solutions

Re: TACACS and enable password

I don't have ACS server in hand right now. But I believe that you need turn on something on ACS server so that you can have TACACS+ to authenticate on enable password. Just enable all TACACS+ feature under "Interface" then go throught each feature you have under user configuration to see which one might be related to it.

5 REPLIES

Re: TACACS and enable password

I don't have ACS server in hand right now. But I believe that you need turn on something on ACS server so that you can have TACACS+ to authenticate on enable password. Just enable all TACACS+ feature under "Interface" then go throught each feature you have under user configuration to see which one might be related to it.

New Member

Re: TACACS and enable password

thanks

I will try it now.

New Member

Re: TACACS and enable password

thanks buddy

thumb's up for you.

Re: TACACS and enable password

Thanks, You are so quick. :)

Purple

Re: TACACS and enable password

You have it set up to use the enable secret or enable password for enable mode so you will have to use that otherwise change the second line so that the end also reads local instead of enable.

252
Views
0
Helpful
5
Replies
CreatePlease to create content