A few weeks ago, I tagged all the connected and static subnets being redistributed in to OSPF. This is used to filter out certain routes at our edge (using a route-map).
It seems at around the same time (there were other changes at that time as well, like upgrading our core sups to sup2T) some issues with voice started happening. Seems to be breaking up. At this stage we are still investigating all the options, and it is by no means clear what is causing the issues. So I just want to rule out the tag.
Will tagging a route cause any issues? The routes are still getting through ok, albeit with a tag of 100.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...