TCP maximum segment size is the size of a packet that is sent from one host to another. It is set as a flag during TCP session establishment. It is MTU minus 40 bytes. With that being said, I am very confused about Window size in WAAS. If MSS is always less than MTU, how can we get up to 1Million byte window? I had always assumed that the 1million byte window was broken up into MTU size packets as it is sent. But if anyone knows the mechanics of how these interrelate, I am more than curious.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...