Hello, i've got two Catalyst 3950 connected on stack for the production network and another 3950 catalyst for the test network. There is a crossover cable from the Catalyst of test network to one of the production catalyst in order to give them conectivity.
Now, somebody wants to comunicate from a workstation on the test network to a server on the production network. I can perfectly ping, but this user tells me that he needs to conect using tcp ports 1433 and 5084.
Is there anyway i can test those ports from the switches?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...