Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Telnet - 6500 pass thru

Hi,

Here is what I am trying to achieve:

- set up a restricted user on the 6500

- allow the user to connect via telnet to the 6500, and only be able to telnet/ssh to a remote PIX.

- I do not wish for the user to have any other visibility within the 6500, only use the 6500 as a telnet/ssh platform to the PIX

Is this possible. If so, how might I achieve this objective?

thx,

Jim

1 REPLY
Hall of Fame Super Bronze

Re: Telnet - 6500 pass thru

Jim,

You can use the autocommand option under the username string if using local authentication.

Please see:

http://www.cisco.com/en/US/docs/ios/11_2/security/command/reference/2rauthen.html

For TACACS, the configuration needs to be done in the TACACS device and I suggest asking in the network management portion of this forum on that task.

HTH,

__

Edison.

123
Views
0
Helpful
1
Replies
CreatePlease to create content