Sir/Madam
We have a 6500 E Switch the following configuration is given below for reference.
The ip to access the switch is 10.248.0.2, and we can only access it from 202.59.76.120 255.255.255.240.
We want to change 10.248.0.2 to 192.168.0.33 and want to give access to any other ip rather than 202.59.76.120.
Please help.
interface Vlan1
ip address 10.248.0.2 255.255.255.0
no ip redirects
!
ip classless
ip route 0.0.0.0 0.0.0.0 10.248.0.1
!
!
ip http server
ip http secure-server
!
logging 202.59.80.85
access-list 2 permit 0.0.0.7 255.255.255.0
access-list 2 deny 0.0.0.8 255.255.255.240
access-list 2 permit 0.0.0.8 255.255.255.240
access-list 50 permit 202.59.76.120
access-list 50 deny any log
access-list 110 deny tcp any host 10.248.0.2 eq echo
access-list 110 deny tcp any host 10.248.0.2 eq discard
access-list 110 deny tcp any host 10.248.0.2 eq daytime
access-list 110 deny tcp any host 10.248.0.2 eq chargen
access-list 110 deny tcp any host 10.248.0.2 eq telnet
access-list 110 deny tcp any host 10.248.0.2 eq finger
access-list 111 deny ip 127.0.0.0 0.255.255.255 any
access-list 111 deny ip 192.168.0.0 0.0.0.255 any
access-list 111 deny ip 172.16.0.0 0.0.255.255 any
access-list 111 deny ip 10.0.0.0 0.255.255.255 any
access-list 111 deny ip host 0.0.0.0 any
access-list 111 deny ip 224.0.0.0 31.255.255.255 any
access-list 111 deny icmp any any redirect
access-list 112 deny udp any any eq snmp
access-list 112 permit ip any any
no cdp run
snmp-server community zee RO
!
!
control-plane
!
!
dial-peer cor custom
!
!
!
alias exec proc show proc cpu sort | excl 0.00%__0.00%__0.00%
!
line con 0
login
line vty 0 4
session-timeout 10
access-class 50 in
exec-timeout 5 0
password 7 0456041301354D470739061E010803
login
line vty 5 1510
session-timeout 10
access-class 2 in
exec-timeout 120 0
password 7 070124544200171D
login
!
ntp clock-period 17179909
ntp server 202.59.80.11
!
end