Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Telnet session problem with 3750G-24TS

I have telnet session problem with cisco 3750G-24TS. Beacause telnet session line vty dead every time after 30 second if i dont touch

any keyboard puttons. I try also configured session timeout and exec-timeout but it's does help this problem.

default exec time is 10 minutes and seession should be waits for the user input before the time out and closing the seession.

line con 0

line vty 0 4

password 7 xxxxxxxxxxxxxx

login

line vty 5 15

password 7 xxxxxxxxxxxxxxx

login

!

end

1 REPLY

Re: Telnet session problem with 3750G-24TS

This is the timeout for entering the authentication input. That is set for 30s as shown in the screenshot below:

Timeouts: Idle EXEC Idle Session Modem Answer Session Dispatch

never never none not set

Idle Session Disconnect Warning

never

Login-sequence User Response

00:00:30

Autoselect Initial Wait

not set

The configurable timeouts are only valid after succesfull authentication.

Regards,

Leo

354
Views
0
Helpful
1
Replies
CreatePlease to create content