Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Telnet to Ws-svc-cmm-6t1 Problems

Would anybody know how I could get the configuration of our CMM. The modual is setup in our 6500 switch. This is what I have when I do sho CDP.

Device ID: OTTVGP01_CMM

Entry address(es):

IP address: 10.1.100.11

Platform: cisco WS-SVC-CMM Cat6k Voice Linecard, Capabilities: Router

Interface: GigabitEthernet4/1, Port ID (outgoing port): GigabitEthernet1/0

Holdtime : 130 sec

Version :

Cisco IOS Software, Cat6K-lc Software (wscmm-IPVOICE-M), Version 12.4(7b), RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Thu 13-Jul-06 18:01 by ccai

advertisement version: 2

Duplex: full

----------------------------------------

When I try to telnet to the ip 10.1.100.11 I get the following error: Trying 10.1.100.11 ... Open

Password required, but none set

[Connection to 10.1.100.11 closed by foreign host]

My goal is to have th running config of this communication modul.

Thanks in advance, J

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Telnet to Ws-svc-cmm-6t1 Problems

What software is on you 6500?

If is it CatOS, you can do session mod_number.

If it is IOS, you can do session slot mod_number processor 0

http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xy/archive/gtcmm.html#wp1193907

HTH,

jerry

1 REPLY
Cisco Employee

Re: Telnet to Ws-svc-cmm-6t1 Problems

What software is on you 6500?

If is it CatOS, you can do session mod_number.

If it is IOS, you can do session slot mod_number processor 0

http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xy/archive/gtcmm.html#wp1193907

HTH,

jerry

302
Views
0
Helpful
1
Replies
CreatePlease to create content