Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

test etherchannel load-balance on 4948

is there a way to see where the traffic will go on cat 4948 in the etherchannel.

i could not find test etherchannel load-balance command.

  • LAN Switching and Routing
1 ACCEPTED SOLUTION

Accepted Solutions

Re: test etherchannel load-balance on 4948

Hi, here is what you are looking:

show platform software etherchannel port-channel 1 map x.x.x.x y.y.y.y

Switch#show platform software etherchannel port-channel 1 ?

map Map given parameters to a port in the channel

| Output modifiers

Switch#show platform software etherchannel port-channel 1 map ?

ip Ip address

l4-port TCP/UDP port numbers

mac Mac address

Switch#show platform software etherchannel port-channel 1 map 1.1.1.1 ?

% Unrecognized command

Switch#show platform software etherchannel port-channel 1 map ip ?

A.B.C.D Source/Destination Ip address

Switch#show platform software etherchannel port-channel 1 map ip

2 REPLIES

Re: test etherchannel load-balance on 4948

Hi, here is what you are looking:

show platform software etherchannel port-channel 1 map x.x.x.x y.y.y.y

Switch#show platform software etherchannel port-channel 1 ?

map Map given parameters to a port in the channel

| Output modifiers

Switch#show platform software etherchannel port-channel 1 map ?

ip Ip address

l4-port TCP/UDP port numbers

mac Mac address

Switch#show platform software etherchannel port-channel 1 map 1.1.1.1 ?

% Unrecognized command

Switch#show platform software etherchannel port-channel 1 map ip ?

A.B.C.D Source/Destination Ip address

Switch#show platform software etherchannel port-channel 1 map ip

New Member

Re: test etherchannel load-balance on 4948

awesome

you are the man

1599
Views
5
Helpful
2
Replies