Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Test Multicast routing with 1801

hi,

I would like test multicast routing with cisco1801.

i create 2 Vlan. Vlan 200 (192.168.200.x) affect Fastethernet 1, Vlan 130 (192.168.130.x) Fastethernet 5.

Version IOS is : adipservice-k9 124-9.t1

  1. ip multicast-routing

#int Vlan 130

ip address 192.168.130.254 255.255.255.0

Ip pim dense-mode

#int Vlan 200

Ip address 192.168.200.254 255.255.255.0

Ip pim dense-mode

I used VLC for my test.

When i connect source (224.10.10.10) and recever ( Udp://@224.10.10.10:1234), that's ok!

But, source is on the Vlan 200 and reicever on the Vlan 130, is not good!

I test with "sparse-mode", i have same problem.

Tank you for help!

2 REPLIES

Test Multicast routing with 1801

What do you mean it's "not good?" What is it doing or not doing? Is it that the quality is bad or does it not work at all?

HTH, John *** Please rate all useful posts ***
New Member

Re: Test Multicast routing with 1801

It not work at all!

I think the problem it s VLC.

You know another software like VLC ?

Thank you

Sent from Cisco Technical Support iPhone App

295
Views
0
Helpful
2
Replies