cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1127
Views
10
Helpful
4
Replies

TestAclPermit Fail in WS-X6748-SFP

hello team!

i need help.

in my C6506-E installed module WS-X6748-SFP with WS-F6700-DFC3BXL

last time a see errors:

18:42:49: %DIAG-SP-6-TEST_RUNNING: Module 3: Running TestAclPermit{ID=23} ...

18:42:51: %DIAG-SP-3-TEST_FAIL: Module 3: TestAclPermit{ID=23} has failed. Error code = 0x1

23) TestAclPermit -------------------> F

Current bootup diagnostic level: minimal

        Module 3:

          Overall Diagnostic Result for Module 3 : MINOR ERROR

          Diagnostic level at card bootup: minimal

          Test results: (. = Pass, F = Fail, U = Untested)

            1) TestTransceiverIntegrity:

              Port  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16

              ----------------------------------------------------

                    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

              Port 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

              ----------------------------------------------------

                    .  .  .  .  U  .  .  .  .  .  .  .  .  .  .  .

              Port 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

              ----------------------------------------------------

                    .  .  .  .  .  .  .  .  .  U  .  .  U  U  .  .

            2) TestLoopback:

              Port  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16

              ----------------------------------------------------

                    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

              Port 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

              ----------------------------------------------------

                    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

              Port 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

              ----------------------------------------------------

                    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

            3) TestScratchRegister -------------> .

            4) TestTxPathMonitoring ------------> .

            5) TestDontLearn -------------------> U

            6) TestConditionalLearn ------------> .

            7) TestNewLearn --------------------> U

            8) TestStaticEntry -----------------> U

            9) TestIndexLearn ------------------> U

           10) TestCapture ---------------------> U

           11) TestTrap ------------------------> U

           12) TestMacNotification -------------> .

           13) TestFibDevices ------------------> .

           14) testIPv4FibShortcut -------------> .

           15) TestIPv6FibShortcut -------------> .

           16) TestL3HealthMonitoring ----------> U

           17) TestNATFibShortcut --------------> .

           18) TestMPLSFibShortcut -------------> .

           19) TestL3Capture -------------------> U

           20) TestL3VlanMet -------------------> .

           21) TestIngressSpan -----------------> .

           22) TestEgressSpan ------------------> .

           23) TestAclPermit -------------------> F

           24) TestAclDeny ---------------------> U

           25) TestQos -------------------------> .

           26) TestNetflowShortcut -------------> .

           27) TestLinecardMemory --------------> U

           28) TestEobcStressPing --------------> U

           29) TestFibTcamSSRAM ----------------> U

  23) TestAclPermit -------------------> F

                  Error code ------------------> 1 (DIAG_FAILURE)

                  Total run count -------------> 1

                  Last test execution time ----> Dec 08 2011 14:16:18

                  First test failure time -----> Dec 08 2011 14:16:18

                  Last test failure time ------> Dec 08 2011 14:16:18

                  Last test pass time ---------> n/a

                  Total failure count ---------> 1

                  Consecutive failure count ---> 1

diagnostic start module 3 test 23

Module 3: Running test(s) 23 may disrupt normal system operation

Do you want to continue? [no]: yes

Dec  9 09:46:57 172.24.0.1 155: 18:42:49: %DIAG-SP-6-TEST_RUNNING: Module 3: Running TestAclPermit{ID=23} ...

Dec  9 09:46:59 172.24.0.1 156: 18:42:51: %DIAG-SP-3-TEST_FAIL: Module 3: TestAclPermit{ID=23} has failed. Error code = 0x1

many port in WS-X6748-SFP not work

GigabitEthernet3/23 is up, line protocol is up (connected)

but i cant find mac address on port

may be a problem because of "TestAclPermit -------------------> F" ?

thanks in advance!

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

Try reseating the blade.  Otherwise, the blade needs to be RMA-ed.

smogra
Cisco Employee
Cisco Employee

Would advise to set the diagnostic level to complete and then re-seat. (right now, it is on minimal which is default.)

As mentioned above, most likely reseat should resolve the issue. But if the module fails, this will indicate a hardware failure.

--Sweta

Please rate useful posts.

thanks for answer,

re-seat not help

Thanks for the rating Dmitry.

Looks like your next move is to call Cisco TAC and give TAC the serial number of your 6500 chassis and get the blade replaced.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: