Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

TestProtocolMatchChannel --------> F

Router>sh diagn mod 5

Current bootup diagnostic level: minimal

Module 5: Supervisor Engine 32 10GE (Active) SerialNo : SAL1010F4HS

Overall Diagnostic Result for Module 5 : MINOR ERROR

Diagnostic level at card bootup: minimal

Test results: (. = Pass, F = Fail, U = Untested)

1) TestSPRPInbandPing --------------> U

2) TestTransceiverIntegrity:

Port 1 2

----------

U U

3) TestActiveToStandbyLoopback:

Port 1 2 3

-------------

U U U

4) TestLoopback:

Port 1 2 3

-------------

. . .

5) TestTxPathMonitoring ------------> .

6) TestNewIndexLearn ---------------> .

7) TestDontConditionalLearn --------> .

8) TestBadBpduTrap -----------------> .

9) TestMatchCapture ----------------> .

10) TestProtocolMatchChannel --------> F

11) TestFibDevices ------------------> .

12) TestIPv4FibShortcut -------------> .

13) TestL3Capture2 ------------------> .

14) TestIPv6FibShortcut -------------> .

15) TestMPLSFibShortcut -------------> .

16) TestNATFibShortcut --------------> .

17) TestAclPermit -------------------> .

18) TestAclDeny ---------------------> .

19) TestQoSTcam ---------------------> .

20) TestL3VlanMet -------------------> .

21) TestIngressSpan -----------------> .

22) TestEgressSpan ------------------> .

23) TestNetflowInlineRewrite:

Port 1 2 3

-------------

U U U

24) TestTrafficStress ---------------> U

25) TestFibTcamSSRAM ----------------> U

26) TestAsicMemory ------------------> U

27) TestAclQosTcam ------------------> U

28) TestNetflowTcam -----------------> U

29) ScheduleSwitchover --------------> U

30) TestFirmwareDiagStatus ----------> .

These are the test results of sup32-10GE(base),I Wonder if there are something wrong in software or hardware.How can i do for these .THANKS A LOT!by the way ,it is good for CATOS. <ios:s3223-ipbasek9-mz.122-18.SXF14.bin catos:cat6000-sup32pfc3cvk8.8-7-1.bin >

1 REPLY
Purple

Re: TestProtocolMatchChannel --------> F

Set the diagnostic level as complete and reload again and look at the post tests , if you are still seeing the error and or other errors open a tac case.

332
Views
0
Helpful
1
Replies