Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

The problem about vrrp

Dear all,I have a problem about vrrp,my core switch is cisco 3750x and huawei S5700-28C-EI, after I configured vrrp between them,the switch log got the error problem as follow:

*Jan 11 00:01:43.111: %VRRP-6-STATECHANGE: g1/0 Grp 3 state Backup -> Master

*Jan 11 00:01:43.111: VRRP: tbridge_smf_update failed

*Jan 11 00:01:44.187: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0

*Jan 11 00:01:46.539: VRRP: Advertisement from 10.252.200.36 has an incorrect group 10 id for interface g1/0                

*Jan 11 00:01:50.323: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0

*Jan 11 00:01:51.707: VRRP: Advertisement from 10.252.200.36 has an incorrect group 10 id for interface g1/0

*Jan 11 00:01:52.079: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0

*Jan 11 00:01:53.079: VRRP: Advertisement from 10.252.200.34 has an incorrect group 10 id for interface g1/0

If cisco and huawei cannot interconnect with each other?

1 REPLY

The problem about vrrp

Can you post the interface config from the huawei and cisco device?

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
447
Views
0
Helpful
1
Replies
CreatePlease login to create content