02-02-2012 09:35 PM - edited 03-07-2019 04:42 AM
Hi ,
The below is output of cisco 3845 router.As per cisco the capacity of process switching for this router is 17MB & fast switching is 256 MB.But when i checked the output of the router , It seems to be exceeding.Kindly clarify me whther the load is more for this router,
HBBCPMPLSR4#Show interfaces switching
GigabitEthernet0/0 *** LAN to 10.225.36.3 Gi1/22 ***
Throttle count 22
Drops RP 732275 SP 0
SPD Flushes Fast 156 SSE 0
SPD Aggress Fast 0
SPD Priority Inputs 10230944 Drops 0
Protocol IP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 12677265 1298798700 7541150 783071826
Cache misses 10 - - -
Fast 1811336467 2446870812 1441082749 2835012751
Auton/SSE 0 0 0 0
Protocol DEC MOP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 0 0 548 42196
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
Protocol ARP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 1124 67440 205 12300
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
Protocol CDP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 6078 2765490 5473 2046902
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
Protocol Other
Switching path Pkts In Chars In Pkts Out Chars Out
Process 0 0 32819 1969140
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
NOTE: all counts are cumulative and reset only after a reload.
GigabitEthernet0/1 *** RRI SLB to HBBCPR2 (10.225.36.6) Gi1/41 ***
Throttle count 2482
Drops RP 738343 SP 0
SPD Flushes Fast 104 SSE 0
SPD Aggress Fast 0
SPD Priority Inputs 9067325 Drops 647
Protocol IP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 15644435 2428668156 15061839 2087501530
Cache misses 0 - - -
Fast 1441506223 1664217930 1812060658 1657842574
Auton/SSE 0 0 0 0
Protocol DEC MOP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 0 0 548 42196
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
Protocol ARP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 68 4080 72 4320
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
Protocol CDP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 5466 2536224 5473 2046902
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
Protocol Other
Switching path Pkts In Chars In Pkts Out Chars Out
Process 0 0 32819 1969140
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
NOTE: all counts are cumulative and reset only after a reload.
Loopback100
Protocol IP
Switching path Pkts In Chars In Pkts Out Chars Out
Process 70897 4253820 70897 4253820
Cache misses 0 - - -
Fast 0 0 0 0
Auton/SSE 0 0 0 0
NOTE: all counts are cumulative and reset only after a reload.
Thanks in advance
02-02-2012 09:51 PM
Hi,
Check this post, last replay has a link to a info sheet which may help you.
https://supportforums.cisco.com/thread/205251
Eugen
02-03-2012 08:07 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Performance specs often are for minimal size packets. More "normal" size packets generally allow more throughput.
So, actual production input can be higher, although it can be lower too as additional service features impact CPU and you usually need to allow for duplex traffic.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide