to load the .bin image onto the switches at the same time
I have around 20 catalyst 3560 switches and have got to upgrade the IOS on all these switches rather than upgrading these one by one. So could anyone suggest me how can I upgrade the IOS on all these cisco switches at the same time? I do have the .bin image file for the 3560 cisco switch and the TFTP server.
Re: to load the .bin image onto the switches at the same time
There is no way to do this unless you have management tool like ciscoworks or another OEM vendor. should take that long to do 20 switch anyway. Put your image on the tftp server and get them started , you rarely have a problem where they won't load .
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...