to Recover telent password on switch

[sushil]

Hi,

I have console login password but not able to login to my L3 3569 switch using telnet.How can i recover that?

Reg,

Sushil

[gpulos]

Use the password recovery technique for your device type shown in the link below:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00801746e6.shtml

[mattcalderon]

If you have console access, just get into config mode on your switch and use the commands:

line vty 0 4

password cisco

login

No need for a password recovery if you have console access.

[glen.grant]

Most people will lock down the console port with a password so he probably doesn't access.

[sushil]

Well I want to know whether the other way to recover telnet password than Rommon.

Soemone in our tech team set the line

vty 0 4 password and don't know what is this?

Service password encryption is there and no aaa new-model.

Want to know other method than tradition changing config register stuff keeping in mind full console access I have and forgot the telnet password.

Reg,

Sushil

[mattcalderon]

If you have full console access go follow my recommendations above. Go into line vty and change the password to whatever you want.