Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

to Recover telent password on switch

Hi,

I have console login password but not able to login to my L3 3569 switch using telnet.How can i recover that?

Reg,

Sushil

5 REPLIES
Blue

Re: to Recover telent password on switch

Use the password recovery technique for your device type shown in the link below:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00801746e6.shtml

Re: to Recover telent password on switch

If you have console access, just get into config mode on your switch and use the commands:

line vty 0 4

password cisco

login

No need for a password recovery if you have console access.

Purple

Re: to Recover telent password on switch

Most people will lock down the console port with a password so he probably doesn't access.

New Member

Re: to Recover telent password on switch

Well I want to know whether the other way to recover telnet password than Rommon.

Soemone in our tech team set the line

vty 0 4 password and don't know what is this?

Service password encryption is there and no aaa new-model.

Want to know other method than tradition changing config register stuff keeping in mind full console access I have and forgot the telnet password.

Reg,

Sushil

Re: to Recover telent password on switch

If you have full console access go follow my recommendations above. Go into line vty and change the password to whatever you want.

286
Views
4
Helpful
5
Replies
CreatePlease to create content