Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Total VWIC2 cards supported on 2801

How many of the VWIC2-2MFT-T1/E1 can be used in the 2801, all for data?

I know here it mentions how many slots support what, but its a bit confusing, and I remember having trouble bringing up the card in slot 2 and had to move card to third slot, I'm running 12.4(25b), and need to add 2 more T1 interface for a total of 6, all for data.

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/ps5882/product_data_sheet0900aecd8016fa68_ps5854_Products_Data_Sheet.html

• 4 slots; 2 slots support HWIC, WIC, VIC, or VWIC type modules

• 1 slot supports WIC, VIC, or VWIC type modules

• 1 slot supports VIC or VWIC type modules

Everyone's tags (3)
4 REPLIES
Hall of Fame Super Gold

Total VWIC2 cards supported on 2801

New Member

Total VWIC2 cards supported on 2801

That document does not specify if all slots in the 2801 support it, only that the card is supported in general. Can anyone confirm if it will run in slots 2 and 4?

New Member

Total VWIC2 cards supported on 2801

Since I'm using these ports for data, will a HWIC-4T1/E1 run on a 2801?

New Member

Total VWIC2 cards supported on 2801

Hello,

Usually the VWIC are supported on slot 2 or 3. So the VWIC2-2MFT-T1/E1 should work in slot 2. Could you post 'show diag' when you had the module in slot 2

And to answer your question - the HWIC-4T1/E1 is 'not' supported on 2801 router.

HTH

PS: Rate all the posts if it answers your question.

1191
Views
0
Helpful
4
Replies
CreatePlease to create content