Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Traceback error decode

Hi

Does anyone know how to identifiy the following caveat, I have the following from the crashinfo. It only seemed to crash a single 3750 in the stack.

%SUPERVISOR-3-FATAL: MIC exception error 80 E30700CF 0 DBF0
-Traceback= 1849408 184CA1C 179B928 179B8D0 17A1688 17A19A0 179B9D8 2A67A20 2A67EFC 2A68018 1D51468 1D5076C 1D504A8 1D50508 1D5000C 290D128 28E0FD4

%SYS-2-CHUNKFREE: Attempted to free nonchunk memory, chunk 6038584, data 7C001F8C. -Process= "SNMP ENGINE", ipl= 0, pid= 315
-Traceback= 2A67BF4 2A68018 1D51468 1D5076C 1D504A8 1D50508 1D5000C 290D128 28E0FD4 28D16CC 28FC494 1B91B6C 1B885F8

=== Start of Crashinfo Collection ===
--More--        

For image:
Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(53)SE2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 21-Apr-10 04:49 by prod_rel_team

I have attached the show stacks.

Regards

Everyone's tags (3)
3 REPLIES
Hall of Fame Super Gold

Traceback error decode

I can't or don't know how to decode your traceback but one thing sticks out like a sore thumb and it's the IOS version you're using.

I don't know what the internal Cisco descision why this IOS version was the "last" of it's kind (release date of 27 April 2010) but I, for one, wouldn't recommend this IOS.

Upgrade to 12.2(55)SE5 or 12.2(55)SE6.

New Member

Traceback error decode

Thanks

New Member

Re: Traceback error decode

Issue this command and send it to Cisco tac show tech and the crash info. If don't have any Cisco contract that is the issue . You need to upgrade or replace the iOS

Sent from Cisco Technical Support iPad App

4874
Views
5
Helpful
3
Replies
CreatePlease to create content