Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Bronze

track and sla reachbility

Hi everybody

Please consider the following

R1(config)track 2 ip sla 11 state.

When the above command is configured, the "tracking object 2"   will look at ip sla operation's recent return code then determine the tracking state as either up or down.

What will happen If i configure:

R1(config)# track 2 ip sla 11 reachability

In short when we use the option " reachbility"  as in above command. what will tracking object 2 do ?

Thanks and have a great day

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

track and sla reachbility

Hi Sarah,

State tracks the error return code for the tracked IP SLA object.

Reachability tracks if the route is reachable or not.

You would use reachability code if you are trying to track a static route.

Cheers,

-amit singh

1 REPLY
Cisco Employee

track and sla reachbility

Hi Sarah,

State tracks the error return code for the tracked IP SLA object.

Reachability tracks if the route is reachable or not.

You would use reachability code if you are trying to track a static route.

Cheers,

-amit singh

132
Views
0
Helpful
1
Replies