03-28-2007 11:24 PM - edited 03-05-2019 03:10 PM
Hi Netpros,
Does anybody know what the 'track 58 interface Serial0/0/0.17 ip routing' Command means on the below config ..?
track 58 interface Serial0/0/0.17 ip routing
!
!
!
interface FastEthernet0/0
description **** ethernet LAN
ip address X.X.X.X 255.255.255.0
no ip redirects
ip route-cache flow
duplex auto
speed auto
standby 58 ip X.X.X.1
standby 58 priority 150
standby 58 preempt
standby 58 track 58 decrement 60
Appreciate your comments
Solved! Go to Solution.
03-28-2007 11:32 PM
Fernando,
This command performs tracking of ip routing state of s0/0/0.17 interface and triggers
tracking client (HSRP in this example) to
decrement its priority value in the case of
IP routing condition failure.
Here is the link you can read about it more:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541be.html
HTH,
OW
* Plz rate all useful posts
03-28-2007 11:32 PM
Fernando,
This command performs tracking of ip routing state of s0/0/0.17 interface and triggers
tracking client (HSRP in this example) to
decrement its priority value in the case of
IP routing condition failure.
Here is the link you can read about it more:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a00801541be.html
HTH,
OW
* Plz rate all useful posts
03-29-2007 04:17 PM
Thanks OW
This is the link I was looking for ..
Cheers,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide