Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

track ip route

hi,

I have a 4506 switch running 12.2-31.SGA7

and i use static routes instead of routing protocols.

How can i check the state on a static route?

I want to add backup routes with track but the IOS doesnt support the rtr command only track <1-500> ip route.

4 REPLIES

Re: track ip route

If you are going to add backup route also static one, then you can make the backup static route as floating by putting it's administrative distance higher..

...so you don't have to worry about tracking your primary static route!!!

HTH..

New Member

Re: track ip route

I also have floating backup static routes but dont work because the switch cant understand that a route is "down". Is more than one hop awy.

Re: track ip route

Maybe you need to use the Dynamic Routing Protocol...

Green

Re: track ip route

This document contains the releases which support object tracking.

http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html#wp1072790

412
Views
0
Helpful
4
Replies