Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Traffic aggregation and session based splitting

I am looking for a solution where traffic from multiple 10G links (Say 8 links) can be received using TAPs, aggregated and than load balanced to say 8x10Gbps ports connected to 8 Monitoring servers running sniffer based application. The load balancing should based on sessions (flows) so that on each server can receive up to 5 Gbps of traffic of same sessions.

I explored two options to achieve it but I do not whether it will be achievable.

Option1: Using SPAN port receive the traffic from all input Source ports and than send it to a Etherchannel or Port Channel comprising 8 ports. Once the traffic is available to EtherChannel it can load balance to all member ports based on the defined criteria using global command.

Option2: Using VACL receive the traffic from all input ports (Keeping them in one VLAN) and redirect the traffic to a Port Channel.

Can someone with prior experience suggest the best way to achieve it and How?

Thanks

Everyone's tags (3)
250
Views
0
Helpful
0
Replies