the 0000's on last columns are the src and dest ports.why are they zero,what does they mean?
Also we would be having any sensitive traffic coming to this router soon, what would be the best possible way out to have accomodate that traffic as well, considering currently autoqos is applied for existing voice and rest www traffic is not being used with any qos.
We already have voip being operated on this routers link which is set with qos for this.now, there is another sensitive traffic to be accomodated(more of graphical in nature), so is it fine to go ahead with QOS alterations to existing config to do this.
Attached is the existing qos config.And one thing to note, the particular application to be used behind this router will be NAT over on another security appliance.i.e the outside request will come via NAT ip thru the security appliance and across to this router on the application.Should the qos have nat ip or original private ip.Any help is appreciated.
The new application is sensitive to packet drops? If so, giving priority-queuing seems to be a sensible approach.
If the application isn't sensitive to packet drops and you just want to make sure there is some guaranteed bandwidth in case of congestion, then I recommend applying bandwidth guaranteed.
Based on the numbers from the file, you are giving 50% of priority queuing on egress while the rule of thumb is around 33% (not that 50% would be unsupported).
The problem with giving too much % to priority queuing is that you may have a higher chance to starve other applications as PQ de-queues packets from the egress interface before any other packets.
You can try both approaches and observe the difference behavior then adjust accordingly.
As for using the NAT IP or the original private IP, you need to examine what IP address the router itself sees at the moment when QoS takes place. It's kind of hard for me to tell with the little information I have at hand.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.