Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Traffic Analyzer

HI all

please i want to run Netflow on my  CIsco switch 3750x-TE, but it seem doesn't support on it , could u please guide me to use another feature on cisco to work as netflow for traffic analysing ?

5 REPLIES
Cisco Employee

Traffic Analyzer

Hi Rawa,

You can use flexible netflow. Here is the link to the guide:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-0_1_se/configuration/guide/3750xcg/swmnetflow.html#wp1335576

Kind Regards,
Ivan Shirshin

**Please grade this post if you find it useful.

Kind Regards, Ivan Shirshin **Please grade this post if you find it useful.
New Member

Traffic Analyzer

Dear Ivan

please i can't run the configuration of Flexible Netflow on my switch , please help

Cisco Employee

Traffic Analyzer

Hi Rawa,

Are you not able to configure it or encounter some issue during configuration?

Note that Flexible NetFlow is supported only on the Catalyst 3750-X and 3560-X switch running the IP base or IP services feature set and equipped with the network services module. It is not supported on switches running the NPE or the LAN base image.

Kind Regards,
Ivan Shirshin

**Please grade this post if you find it useful.

Kind Regards, Ivan Shirshin **Please grade this post if you find it useful.
New Member

Traffic Analyzer

Thanks Ivan

find my switch Model in below table

Switch Ports Model              SW Version            SW Image              

------ ----- -----              ----------            ----------            

*    1 30    WS-C3750X-24       12.2(55)SE5          C3750E-UNIVERSALK9-M

and running "IP services"

but I can't run first command of flexible netflow ( flow record ) this command is not available , so how can i configure !

please HELP

"

New Member

Traffic Analyzer

Dears

Please ANy update !!!

339
Views
8
Helpful
5
Replies
CreatePlease to create content