Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Traffic control on Switch

Guys i have cisco 3750 one of the port is attached to another swicth.....i want to control the bandwidth on that specific port (there are 3 users on the otehr swicth) i want to ristrict them on 128 Kbps.......what would b the config an dhow come i am gonna do it....urgent help me required......thanks in advance

1 REPLY

Re: Traffic control on Switch

You can configure policing on the port to achieve this

class-map match-all limit

match access-group 101

access-list 101 permit ip any any

policy-map BW_CTRL

class limit

police cir 128000 conform-acrion-transmit exceed-action-drop

interface G 1/0/1

service-policy input BW-CTRL

More info here

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_37_se/configuration/guide/swqos.html#wp1032145

HTH

Narayan

170
Views
0
Helpful
1
Replies