Traffic filtering other subnet with Cisco 1700 series
Hi, I've got two inet connections, one comes from a D-link router that at the same time does the function of switch. The other connection is managed by a Cisco 1721. My idea is to focus all the security/traffic filtering on the Cisco router and then send back the traffic to the D-link subnet stations. The D-link has the subnet address 192.168.0.1 and the Cisco the 192.168.1.1. Thanks for your help !
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...