Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

Transceiver Connection

Hi!

I?m connecting a Metrobility media converter (mtrj45-rj45 100 mbps) with a cisco 4503. When I ping the host 192.168.1.6 in the converter i just received timeout.

my config is very simple:

---------------

interface Vlan1

ip address 192.168.1.254 255.255.255.0

interface FastEthernet2/1

switchport access vlan 2

switchport mode access

speed 100

duplex full

--------------

C4k#sh mac-address-table

Unicast Entries

vlan mac address type protocols port

-------+---------------+--------+---------------------+--------------------

1 0019.55f2.c83f static ip,ipx,assigned,other Switch

2 000e.0cb7.a5e6 dynamic ip,ipx,other FastEthernet2/6

2 0019.55f2.c83f static ip,ipx,assigned,other Switch

2 0060.e0c0.0dd5 dynamic ip,ipx,other FastEthernet2/2

2 0060.e0c0.0e74 dynamic ip,ipx,other FastEthernet2/3

2 4000.0000.0006 dynamic ip,other FastEthernet2/1

C4k#sh arp

Protocol Address Age (min) Hardware Addr Type Interface

Internet 192.168.1.106 1 0060.e0c0.0dd5 ARPA Vlan1

Internet 192.168.1.254 - 0019.55f2.c83f ARPA Vlan1

C4k#

The converter is connected in the port fa2/1.

Please help me.

Thanks in Advanced.

318
Views
0
Helpful
0
Replies
CreatePlease to create content