Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Trap messages to syslog server cisco WS-C4503 - 3750x

All,

I have issue  with respect to  SNMP trap  , below is the histroy

SW1 -- trunk port Gi 2/11  ( old switch )

SW2-  trunk port  Gi 1/0/2 ( old switch)

recently  SW2 got replaced 

SW1 -- trunk port Gi 2/11  ( old switch )

SW2-  trunk port  Gi 1/1/2 ( new switch)

SYSLOG server still recieving  trap message saying that trunk port between  SW1 2/11  to SW2 Gi 1/0/2  is down , however SW2 trunk currently on the new port  Gi 1/1/2  . bit wondering on this .  the new switch Gi 1/0/2 which is currently access port and it is not connected to any host machine since installed and no logging port flap information  ( sh logging output)  is something need to be done at switches to clear log message at server . please advice

below is the port configuration

SW1  ( OLD)

interface GigabitEthernet2/11

description *******

  switchport mode trunk

switchport nonegotiate

SW1#sh run | in trap

logging trap debugging

snmp-server enable traps snmp linkdown linkup coldstart warmstart

snmp-server enable traps envmon fan shutdown supply temperature

snmp-server enable traps hsrp

snmp-server enable traps mac-notification change move threshold

SW2 ( NEW switch )

interface GigabitEthernet1/0/2

switchport mode access

switchport nonegotiate

load-interval 30

spanning-tree portfast

spanning-tree bpduguard enable

spanning-tree guard root

SW2#sh run | in trap

snmp-server enable traps snmp authentication

snmp-server enable traps config

snmp-server enable traps hsrp

snmp-server enable traps bridge newroot topologychange

snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency

snmp-server enable traps vtp

snmp-server enable traps vlancreate

snmp-server enable traps vlandelete

snmp-server enable traps flash insertion removal

snmp-server enable traps envmon fan shutdown supply temperature status

snmp-server enable traps vlan-membership

195
Views
0
Helpful
0
Replies
CreatePlease login to create content