Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Trouble with ATA Flash Cards

Hi Guys,

we encountered a funny issue when using ATA cards.

We want to upgrade our Hybrid SUP2-2GE to Native IOS, but no ATA Cards(64MB or 128MB) are readable or formatable.

Even a 24MB flash card was readable on one but not on another device.

When trying to format the ATA cards from CATOS (format disk0: or Slot0:, both won't work) it just says "unknown device".

Any Ideas how to format these disks and make them readable under CATOS?

thx in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Trouble with ATA Flash Cards

click the following URL as a trouble resolution guide for PCMCIA ATA Flash disks.

http://www.cisco.com/en/US/products/hw/routers/ps167/products_field_notice09186a008082da0a.shtml

1 REPLY
Bronze

Re: Trouble with ATA Flash Cards

click the following URL as a trouble resolution guide for PCMCIA ATA Flash disks.

http://www.cisco.com/en/US/products/hw/routers/ps167/products_field_notice09186a008082da0a.shtml

114
Views
0
Helpful
1
Replies