cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
11934
Views
0
Helpful
17
Replies

Troubleshooting DHCP issues

q-le
Level 2
Level 2

Hi All,

We have 2 x Nexus 7 cores and several access switches 3750 + 2960 and several VLANs.

All working well until recently we have a couple of users in VLAN say 200 reported they can not get an IP address from our Windows DHCP server.

ie hence they can not log to the Domain and we temporarly assign them a static IP addresses  until we figure out what went wrong!!!

We checked the trunk , the DHCP server but can not see anything wrong

How do we troubleshooting this issues ? 

Any advices are much appreciated

Thanks

Peter

 

17 Replies 17

Disable HSRP on Core from VLAN200 and now I can get DHCP !!! 

But still confuse what cause the issues and how to fix it properly ?

 

Please advise

Thanks

 

Dear Q-Le,

 

It seems clear that a certain vlan is unable to perform on Vlan 200 and it could be caused by trunk failures/drops between HSRP participants.

Can you check interface utilization and drops on certain trunks?

 

-

Parvesh

Remember marking as correct answer / helpful answer.

q-le
Level 2
Level 2

We remove HSRP on core2 , and enable it again and it seems to fix the DHCP issues.

Do not know how this process work but i am happy it fix the problems

All good.

 

Thank you all for your help 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card