Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

TRTL: throttle count

I am seeing the TRTL throttle count increasing under a Gig interface when I do a 'show int gi7/1 summary' command on a 6509.

It is mainly multicast traffic from several sources to a single server that is going across the port The port is set as a switch port, portfast enabled and assigned to a vlan, nothing else is included in it's config.

What is causing it to throttle anything and how can I stop it doing this? The interface is running at less than 1%.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: TRTL: throttle count

A high quantity of input queue drops indicates an excess amount of:

1) unicast traffic hitting the CPU that could not be HW switched.2) excess amounts of multicast/broadcast traffic getting directed to the CPU.Refer URL http://www.cisco.com/warp/customer/473/53.shtml#Input_queue

1 REPLY
Silver

Re: TRTL: throttle count

A high quantity of input queue drops indicates an excess amount of:

1) unicast traffic hitting the CPU that could not be HW switched.2) excess amounts of multicast/broadcast traffic getting directed to the CPU.Refer URL http://www.cisco.com/warp/customer/473/53.shtml#Input_queue

2955
Views
0
Helpful
1
Replies