Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

trunk between asa 5510 and aironet 1142 (standolone)

Hi!

Connection schema is: asa5510 --> cisco switch SG200 --> 1142 aironet (standalone)

I did trunk port between devices

vlan 1 (on firewall is Etherenet 0/1)

vlan 100 (on firewall is Etherenet 0/3.100)

vlan 200(on firewall is Etherenet 0/3.200)

and vlans working, i have internet and i can reach company lan, but i can't reach bvi1 port for management!!

because bvi1 interface using untaged packets.

So how to solve that problem, make reachable bvi1 interface from lan?

  • LAN Switching and Routing
4 REPLIES

Assign the BVI an address on

Assign the BVI an address on the native vlan of the trunk between the ASA and 1142.  That traffic would then traverse the trunk untagged by default and should work.

New Member

i changed bvi1 IP to native

i changed bvi1 IP to native vlan ip, but no luck

New Member

Solved!!!on switch was 1vlan

Solved!!!

on switch was 1vlan taged, i did untag 1vlan packets

If my post was helpful,

If my post was helpful, please rate.  Thanks, and glad your issue was resolved.

41
Views
0
Helpful
4
Replies
This widget could not be displayed.