Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Silver

trunk link port is not comingup

Hi ,

g0/0 of 3845 router is connected to g3/47 of 3550 switch.

3845 config :

Int g0/0

speed 100

duplex full

int g0/0.11

encapsulation dot1q 11 native

ip address 10.10.10.2 255.255.255.0

standby 11 ip 10.10.10.1

int g0/0.12

encapsulation dot1q 12

ip address 20.20.20.2 255.255.255.0

standby 11 ip 20.20.20.1

4506 switch :

int g3/47

switchport trunk encapsulation dot1q

switchport mode trunk

switchport trunk native vlan 11

switchport trunk allowed vlan 11,12

int vlan 11

ip address 10.10.10.4 255.255.255.0

As soon as I connect Gig0/0 of 3845 router to Gig3/47 of 4506 switch, gig ports of both the deives are down and are not coming up.What could be the reason..

Thanks,

Satish

6 REPLIES

Re: trunk link port is not comingup

and if you configure speed on the 3845 to auto?

or if you configure both ends to speed 100(0)

Silver

Re: trunk link port is not comingup

Hi ,

I tried few combinations by chaning the speed and duplex settings...after that also ports are not coming up...

Thanks,

Satish

Re: trunk link port is not comingup

and you're using the correct cable?

Silver

Re: trunk link port is not comingup

yah am using machine crimped straight cable..

Thanks,

satish

Purple

Re: trunk link port is not comingup

IS the module you are trying to connect to actually up , do a show mod and make sure it passed diags and looks ok.

Hall of Fame Super Gold

Re: trunk link port is not comingup

Hi Satish,

1. Try a different copper cable;

2. A stupid question: On the 4500, VLAN 11 is "no shut"?

3. Anything in the logs of both appliance to explain why the ports are down?

116
Views
0
Helpful
6
Replies